Double solenoid valve
Belef Pneumatic Actuators Co.,ltd
address：Building B6, No. 8-1 Xinshi Road, Qianzhou Supporting Area, Huishan Economic Development Zone, Wuxi
There is a closed cavity in the solenoid valve with through holes at different positions. Each hole is connected to a different oil pipe. In the middle of the cavity is a piston. There are two electromagnets on both sides. Which side of the magnet coil will be attracted to the valve body when it is energized. On the other hand, by controlling the movement of the valve body to open or close the different oil discharge holes, and the oil inlet is normally open, the hydraulic oil will enter the different oil discharge pipes, and then the piston of the cylinder is pushed by the oil pressure. Drive the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.
purchase：Double solenoid valve
Related Products/ RELATED PRODUCTS